Gr1 0.02mm Titanium Foil Description
1. Product Introduction
Gr1 0.02mm Titanium Foil is produced from Grade 1 commercially pure titanium for ultra-thin Grade 1 foil supply.
It is supplied for microforming, flexible foil and high-formability ultra-thin applications with attention to stable chemistry, dimensional consistency and practical mill delivery requirements.
2. Manufacturing and Supply Capabilities
Process flow: Melting → Forging → Hot Rolling Breakdown → Multi-pass Precision Cold Rolling → Cleaning → Annealing → Leveling → Slitting or Sheeting → Inspection and Packaging.
Available with bright, matte, cleaned or protected surface condition according to product requirements. Thickness, width, flatness and slit condition can be controlled to meet routine processing and custom supply needs.
Technical Specifications
Parameter | Value |
Product name | Gr1 0.02mm Titanium Foil |
Material | Grade 1 commercially pure titanium |
Product form | Foil/strip/slit coil |
Thickness | 0.02 mm nominal |
Width | 15-680 mm |
Length | Coil supply or cut length as requested |
Standards | GB/T 3622-2023, ASTM B265 |
Supply note | Custom supply condition, edge treatment and packaging can be matched to project requirements. |
Element | Ti | O | Fe | C | N | H |
Max. content | Balance (≥99.5%) | ≤0.18% | ≤0.20% | ≤0.08% | ≤0.03% | ≤0.015% |
Property | Value |
Tensile strength | ≥240 MPa |
Yield strength | 140-310 MPa |
Elongation | ≥24% |
Density | 4.51 g/cm3 |
Melting point | ~1668℃ |
Key Features
- Stable rolling quality with consistent flatness and clean slit edges.
- Accurate thickness control for precision stamping, shielding and formed parts.
- Reliable corrosion resistance from proven titanium or nickel chemistry.
- Surface condition can be supplied in bright, matte, cleaned or protected form according to the product position.
- Suitable for custom slit width, coil supply or cut-length supply according to processing needs.
- Clean surface: Free of pinholes and cracks, suitable for high-end use.
Typical Applications
- Precision foil components, diaphragms, etched parts and thin corrosion-resistant barriers.
- Battery, electronics, laboratory or vacuum-system parts depending on grade and thickness.
- Chemical equipment details requiring low weight and stable corrosion behavior.
- Custom thin-foil supply for precision industrial and engineering applications.